Granite Countertop Buffing, Cleaning and Sealing

Radiant Stone Care - We are The Authority on Natural Stone and Concrete in Southern CA. Granite BBQ countertop stain job.

Look at this before and after photo of this Granite cleaning job. This countertop had a large stain that added to being exposed to the natural element gave it an uneven an dull look. We cleaned, buffed and sealed this countertop and you can see the results.

Natural stone in this case Granite, although being a very dense stone can get damaged if not taken care of and maintained properly. In this case this countertop is exposed to natural elements 24/7 and one of the reasons decay starts is when the sealer wears off.
This countertop got a big stain and stains usually occur when the sealer on is gone. Water, dirt and grime build up and the granite starts feeling rough and looking dull.

We work on floors, counter tops, bathrooms, shower, backsplash, driveways, patios.

We work on Marble, Granite, Travertine, Limestone/Sandstone, Concrete, Pavers, Brick. We do Restoration, Clean, Polish and Seal, Clean and Seal, Concrete Polishing and Stain and Repair.

Check out our before and after photos on our website
http://radiantstonecare.com/before-and-after/

Call us with your questions and talk to an expert! 800-930-5421 or visit us at www.radiantstonecare.com

Email us : info@radiantstonecare.com
​​
Check us out on youtube:
https://www.youtube.com/channel/UCFowkERJ2is7Hu6yoKrhI7Q

Flamed Granite Clean and Seal

Radiant Stone Care - Flamed Granite Cleaning and Seal Job - Beverly Hills

These flamed granite floors hadn't been properly cleaned in a long time. The job area has very high foot traffic therefore making it almost impossible to properly cleaning it. The rough surface of the flamed granite makes it easy for dirt and grime to build up inside the ridges and hard to be properly cleaned.

Our expertise has prepared us to handle situations where special detail is needed. First we protected the surrounding areas with plastic drape up to 3 feet high. We then proceeded to clean the floor with a ph neutral cleaner and ran the first round of buffing, it took a few rounds to get the stone to the desired state of cleaning.

After rinsing the floor and buffing it again we let it dry for a few hours. The detailing on corners and grout was done by hand but that's what the job required since our main goal is to always do excel the expectations of our customers. Once the floors were dry we applied 2-3 coats of penetrating topical sealer and let the stone absorb and then buff out the exceeding sealer.
Here's a photo of before and after.

Call us at 800-930-5421
or visit our website: radiantstonecare.com
to consult an expert and get a free quote!